Modular intercalary prosthetic reconstruction for malignant and metastatic tumours of the proximal femur.

To illustrate the surgical technique and explore clinical outcomes of the reconstruction for the malignant and metastatic bone tumour of proximal femur with metallic modular intercalary prosthesis. Sixteen patients who underwent modular intercalary prosthetic reconstruction after tumour resection were included from April 2012 and October 2020. Prosthesis and screws parameters, resected bone length and residual bone length, clinical outcomes and survivorship were analyzed. All patients were followed up for an average of 19 months (range 1-74). In our series, 12 patients died of the progression of the primary disease at the final follow-up. The cumulative survivorship since the treatment of proximal femoral metastasis was 78.6% (11 patients) at 6 months and 38.5% (5 patients) at 1 year. The mean MSTS score was 22.25 ± 4.55 among all patients. There were no cases of loosening or breakage of the prostheses, plates or screws, despite the various measurements of prostheses and residual bones. Modular intercalary prosthetic reconstruction was an effective method for malignant tumour of the proximal femur, including the advantages of providing early pain relief, quickly restoring postoperative function, required a short operation time, and preserving the adjacent joints.

Comparison of demineralized bone matrix with different cycling crushing times in posterolateral fusion model of athymic rats.

Decalcified bone matrix (DBM) is a widely used alternative material for bone transplantation. In the DBM production process, an effective particle size and the highest utilization rate of raw materials can be achieved only through multiple high-speed circulating comminution. The rat posterolateral lumbar fusion model (PLF) is the most mature small animal model for the initial evaluation of the efficacy of graft materials for bone regeneration and spinal fusion. To evaluate the differences in the in vivo osteogenic effects of DBM pulverization through 1, 5, 9, and 14 high-speed cycles, sixty athymic rats were divided into six groups: single cycling crushing (CC1), 5 cycles of crushing (CC5), 9 cycles of crushing (CC9), 13 cycles of crushing (CC13), autogenous bone graft (ABG) and negative control (NC). Posterolateral lumbar fusion was performed. Six weeks after surgery, the bilateral lumbar fusion of athymic rats was evaluated through manual palpation, X-ray, micro-CT and histological sections. Rank data were tested by the rank-sum test, and nonparametric data were tested by the Kruskal‒Wallis H test. The manual palpation and X-ray results showed that the fusion rate did not significantly differ between the CC1, CC5, CC9, CC13 and ABG groups. However, cavities appeared in CC9 and CC13 on the micro-CT image. The bone mass (BV/TV) of CC1, CC5, CC9 and CC13 was better than that of the ABG group, while almost no osteogenesis was observed in the NC group. Histologically, there was no obvious difference between the four groups except that the CC9 group and CC13 group had more fibrous tissues in the new bone. In conclusion, DMB with different cycling crushing times has no obvious difference in fusion rate of PLF, but it is slightly better than the ABG group.

Repair of tendons treated with peracetic acid-ethanol and gamma irradiation by EDC combined with NHS: a morphological, biochemical and biomechanical study in vitro.

The purpose of this study was to investigate whether 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) combined with n-hydroxysuccinimide (NHS) can repair tendon damage caused by peracetic acid-ethanol and gamma irradiation sterilization. The semitendinosus tendons of 15 New Zealand white rabbits were selected as experimental materials, and the tendons were sterilized in a solution containing 1% (v/w) peracetic acid and 24% (v/w) ethanol. After 15 kGy gamma irradiation sterilization, the tendons were randomly divided into three groups (n = 10). The tendons were repaired with EDCs of 0, 2.5 and 5 mM combined with 5 mM NHS for 6 h, the tendons were temporarily stored at - 80 ± °C. The arrangement and spatial structure of collagen fibers were observed by light microscopy and scanning electron microscopy, the collagen type and collagen crimp period were observed under a polarizing microscope, and the collagen fibril diameter and its distribution were measured by transmission electron microscopy, from which the collagen fibril index and mass average diameter were calculated. The resistance of collagen to enzymolysis was detected by the free hydroxyproline test, and tensile fracture and cyclic loading tests of each group of tendons were carried out, from which the elastic modulus, maximum stress, maximum strain, strain energy density and cyclic creep strain were calculated. The obtained results showed that the gap between loose collagen fibers in the 0 mM control group was wider, the parallel arrangement of tendons in the 2.5 and 5 mM groups was more uniform and regular and the fiber space decreased, the crimp period in the 5 mM group was lower than that in the 0 mM group (P < 0.05), and the concentration of hydroxyproline in the 5 mM group (711.64 ± 77.95 µg/g) was better than that in the control group (1150.57 ± 158.75 µg/g). The elastic modulus of the 5 mM group (424.73 ± 150.96 MPa) was better than that of the 0 mM group (179.09 ± 37.14 MPa). Our results show that EDC combined with NHS can repair damaged tendons after peracetic acid-ethanol and gamma radiation treatment, and 5 mM EDC has better morphological performance, anti-enzymolysis ability and biomechanical properties than 2.5 mM EDC.

Effects of demineralization mode and particle size of allogeneic bone powder on its physical and chemical properties.

At present, the commonly used allogeneic bone powder in the clinic can be divided into nondemineralized bone matrix and demineralized bone matrix (DBM). Commonly used demineralizers include acids and ethylene diamine tetraacetic acid (EDTA). There may be some diversities between them. Also, the size of the bone particle can affects its cell compatibility and osteogenic ability. We produced different particle sizes i.e., < 75, 75-100, 100-315, 315-450, 450-650, and 650-1000 µm, and treated in three ways (nondemineralized, demineralized by EDTA, and demineralized by HCl). Scanning electron microscopy showed that the surface of the samples in each group was relatively smooth without obvious differences. The results of specific surface area and porosity analysis showed that they were significantly higher in demineralized bone powder than in nondemineralized bone powder, however, there was no significant difference between the two decalcification methods. The content of hydroxyproline in nondemineralized bone powder and EDTA-demineralized bone powder had no statistical difference, while HCl-demineralization had statistical significance compared with the former two, and the content increased with the decrease of particle size. The protein and BMP-2 extracted from HCl demineralized bone powder were significantly higher than that from nondemineralized bone powder and EDTA demineralized bone powder, and there were differences among different particle sizes. These results suggested the importance of demineralization mode and particle size of the allogenic bone powder and provided guidance for the choice of the most appropriate particle size and demineralization mode to be used in tissue bioengineering.

Prognostic Factors for Bone Survival and Functional Outcomes in Patients With Breast Cancer Spine Metastases.

According to the Global Cancer Statistics 2020 report, breast cancer is the most commonly diagnosed cancer worldwide. Patients with mammary cancer live longer due to the continuous optimization of chemotherapy, targeted drugs, and hormone therapy, which will inevitably lead to an increase in the prevalence of metastatic bone tumors. Bone metastasis affects approximately 8% of patients with mammary cancer, with the spine being the most common site. Metastatic neoplasms can invade the centrum and its attachments, leading to local pain, spinal instability, vertebral pathological fractures, spinal cord compression, impaired neurological function, and paralysis, ultimately reducing the quality of life. Multidisciplinary and personalized management using analgesic drugs, endocrine therapy, corticosteroid therapy, chemotherapy, bisphosphonates, immunotherapy, targeted drugs, radiotherapy, and surgery has been advocated for the treatment of spinal metastases. Multiple paradigms and systems have been proposed to determine suitable treatments. In the early stages, the occurrence of metastasis indicates a terminal stage of the tumor process in patients with malignant tumors, implying that their lifespan is limited. As a result, the choice of treatment is heavily influenced by longevity. However, with the development of treatment methods, the lifespan of patients with tumors has considerably increased in recent years. This leads to the choice of patient's treatment, which depends not only on the patient's survival, but also on the radiotherapy or postoperative functional outcomes. Nevertheless, they fall short of determining the variables that affect survival and functional outcomes in histology-specific subgroups of breast cancer. To accurately predict the bone survival and functional outcomes of patients with breast cancer spine metastases a review of prognostic factors was performed.

Separation Surgery in the Treatment of Spinal Metastasis.

The life expectancy of patients with advanced cancer has been prolonged with the development of systemic treatment technology. Spinal metastasis is one of the common ways of metastasis of advanced tumors, leading to spinal cord compression and compression fractures, which often lead to a significant reduction in patients' quality of life and physical function. Therefore, surgical treatment is still needed for functional recovery and local control. Separation surgery has been known since 2014 when it was purposed. Combined with radiotherapy, it can achieve an ideal goal of local control. This paper gives a brief introduction to separation surgery, hoping to increase the reader's understanding and consider this method in the course of treatment.

Application of Controlled Hypotension During Surgery for Spinal Metastasis.

With advances in tumor treatment, metastasis to bone is increasing, and surgery has become the only choice for most terminal patients. However, spinal surgery has a high risk and is prone to heavy bleeding. Controlled hypotension during surgery has outstanding advantages in reducing intraoperative bleeding and ensuring a clear field of vision, thus avoiding damage to important nerves and vessels. Antihypertensive drugs should be carefully selected after considering the patient's age, different diseases, etc, and a single or combined regimen can be used. Hypotension also inevitably leads to a decrease in perfusion of important organs, so the threshold of hypotension and the maintenance time of hypotension should be strictly limited, and the monitoring of important organs during the operation is particularly important. Information such as blood perfusion, blood oxygen saturation, cardiac output, and neurophysiological conduction potential changes should be obtained in a timely fashion, which will help to reduce the risk of hypotension. In short, when applying controlled hypotension, it is necessary to choose an appropriate threshold and duration, and appropriate monitoring should be conducted during the operation to ensure the safety of the patient.